Load custom-size media
To load cards and photo paper
Use these instructions to load custom-size media.
CAUTION: Use only custom-size media that is supported by the printer. For more
information, see Media specifications.
1.
Lift the output tray.
2.
Slide the paper width guide out as far as possible.
Chapter 1
16
Get started
3.
If the media is too long, lift the latch on the front of the tray and lower the front of
the tray.
2
1
4.
Insert the media print-side down along the right of the main tray. Make sure the
stack of media aligns with the right and back edges of the tray, and does not
exceed the line marking in the tray.
NOTE: Do not load media while the printer is printing.
5.
Slide the media guides in the tray to adjust them for the media size that you have
loaded.
6.
Lower the output tray.
7.
Pull out the tray extender.